85
SQW0566
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Version Disp.]
Check the firmware version of the camera.
●
When you press [MENU/SET] while the version is displayed, software information for this unit,
such as the licence, is displayed.
[Exposure Comp. Reset]
If the recording mode is changed or the camera is turned off, the exposure compensation
(brightness) setting is reset.
Settings: [ON] / [OFF]
[Self Timer Auto Off]
The self-timer is cancelled if the unit is turned off.
Settings: [ON] / [OFF]
[No.Reset]
Reset picture file numbers. (The folder number is updated and the file number starts from
0001.)
• To reset folder number to 100:
First, format the card, and reset the file numbers using [No.Reset]. Then, select [Yes ]
on the folder number reset screen.
●
A folder number between 100 and 999 can be assigned.
Numbers cannot be reset once folder number reaches 999. In this case, save all necessary
pictures to your computer, and format the card (→38).
To Next Page
Loading...
Need help?
General
