78
SQW0566
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Beep]
Sets the beep sounds or shutter sounds.
■
[Beep Volume]
Settings:
(High) / (Low) / (Off)
■
[Shutter Vol.]
Settings:
(High) / (Low) / (Off)
■
[Shutter Tone]
Settings:
/ /
●
When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] are set to “Off”.
[Live View Mode]
Sets the display speed and picture quality of the screen (Live View screen) when
recording pictures.
Settings
[30fps]
Pictures are displayed at 30 fps.
For example, use when you want to record a comparatively slow-moving subject while
confirming the focusing. Minimises power consumption and the operating time is
extended.
[60fps]
Display speed has higher priority over picture quality and pictures are displayed at
60 fps.
For example, use when you want to record a fast-moving subject.
●
The [Live View Mode] setting does not affect the recorded picture.
●
The display speed may slow down in dark locations.
●
When the AC adaptor (optional) and DC coupler (optional) are used, [Live View Mode] is fixed to
[60fps].
●
[Live View Mode] is disabled while the HDMI output is being used for recording.
To Next Page
Loading...
Need help?
General
