74
SQW0566
Basics
Changing the settings assigned to the
control ring/rear dial
Recording mode:
Changes the settings assigned to the control ring/rear dial.
1
Set the menu
→ [Custom] → [Ring/Dial Set]
2
Use to select [ ] (control ring) or [ ] (rear dial) and
press [MENU/SET]
3
Use to select the setting and press [MENU/SET]
[DEFLT] [Normal] [Photo Style] (→129)
[Zoom]
*
(→236)
[Filter Effect] (→131)
[Step Zoom]
*
(→239)
[Aspect Ratio] (→139)
[Exposure Comp.] (→177) [Highlight Shadow] (→133)
[Sensitivity] (→179) [i.Dynamic] (→142)
[White Balance] (→134) [i.Resolution] (→142)
[AF Mode] (→149) [Flash] (→243)
[Focus Mode] (→146, 165, 167) [Flash Adjust.] (→250)
[Drive Mode] (→201)
[OFF] [Not Set]
*
*
Items that can only be set to the control ring
• To return to the default setting, select [Normal].
• If you do not use the control ring, select [Not Set].
• Under [Highlight Shadow], use the control ring and rear dial.
If [Highlight Shadow] is assigned to the control ring (or rear dial), [Highlight
Shadow] will also be assigned to the rear dial (or control ring).
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
To Next Page
Loading...
Need help?
General
