77
SQW0566
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Travel Date]
If you set your travel schedule and record pictures, the day of your trip on which the
picture was taken will be recorded.
■
[Travel Setup]
Settings: [SET] / [OFF]
1
Use to select [Travel Setup] and press [MENU/SET]
2
Use to select [SET] and press [MENU/SET]
3
Use to select the departure date and press [MENU/SET]
4
Use to select the return date and press [MENU/SET]
■
To record [Location]
Once the [Travel Setup] is set, you can set the location.
Select [Location] in step
1
above, and press [MENU/SET]
Use to select [SET] and press [MENU/SET]
Enter your location (Entering text (→87))
●
To print [Location] or the number of days that have passed, either use [Text Stamp] (→291) or
print using the “PHOTOfunSTUDIO” software (→353).
●
The travel date is calculated from the set departure date and the date set in the camera’s clock.
When destination is set in [World Time], days elapsed are calculated based on local destination
time.
●
When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is not
displayed even if [Travel Setup] is set to [SET] after recording.
●
When the current date passes the return date, [Travel Setup] is automatically cancelled.
●
[Travel Date] cannot be recorded for AVCHD motion pictures.
●
[Location] cannot be recorded while recording motion pictures, recording 4K photos, or recording
in [Post Focus].
[Wi-Fi]
Settings: [Wi-Fi Function] / [Wi-Fi Setup]
Configure the settings required for the Wi-Fi function. (→303, 344)
To Next Page
Loading...
