209
SQW0566
Shutter and Drive Settings
Taking pictures with self-timer
4
Press the shutter button halfway to focus,
and press it fully to start recording
• The focus and exposure are fixed when the shutter
button is pressed halfway.
• After the self-timer indicator flashes, recording will
start.
■
To cancel self-timer
In step
2
, select [ ] ([Single]) or [ ].
• You can cancel the self-timer by turning off the camera. (When [Self Timer Auto Off]
(→85) is set to [ON].)
●
If you take a picture with a flash when [ ] is set, the flash output may not be stable in some
cases.
●
It cannot be set to [ ] in the following cases:
• When White Balance Bracket is set
• When recording using [Post Focus]
•
During T (Time) recording
•
When [Multi Exp.] is set
• When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON]
●
This function is not available in the following cases:
• During motion picture recording
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
To Next Page
Loading...
