215
SQW0566
Functions for specific subjects and purposes
Saving a picture by selecting a focus point after recording [Post Focus]
Making fine adjustments to focus
You can enlarge and make fine adjustments to the focus of the picture that you touched
to display in Step
2
of “Select the focus point and save the picture”(→214)
1
Touch [ ]
• The picture can be enlarged.
2
Drag the slide bar to make fine adjustments to focus
• The same operation can be performed using .
3
Touch [ ] to save the picture
• The screen returns to step
1
.
Highlight in-focus portion with colour (peaking)
You can check the degree of focus by setting the detection level for the in-focus portion
and highlighting it with colour.
1
Touch [ ]
• Each time the icon is touched, the setting is switched in order of
[
] ([Detect Level]: [LOW]) → [ ] ([Detect Level]:
[HIGH]) → [OFF].
• The display colour will be the same as set in [Peaking] under the
[Custom] menu. (→172)
To Next Page
Loading...
