220
SQW0566
Functions for specific subjects and purposes
Creating stop motion animation [Stop Motion Animation]
4
Press to select [New] and press
[MENU/SET]
5
Press the shutter button fully
• Up to 9,999 frames can be recorded.
6
Move the subject to decide on the
composition
• Repeat the recording of still pictures in the same way.
• When you turn off the camera during recording, a message to restart recording
will appear when you turn on the camera. To start recording from the next still
picture, select [Yes].
How to create stop motion animation effectively
●
Up to two previously recorded pictures are displayed on the recording screen.
Check this screen as a guideline for determining the amount of required motion.
●
You can press the Playback button to check the recorded pictures. Press the
[
Q.MENU/
] button to delete unnecessary pictures. To return to the recording
screen, press the Playback button again.
7
Touch [ ] to end the recording
• You can also end the recording by selecting [Stop
Motion Animation] in the [Rec] menu, and then
pressing [MENU/SET].
• When [Auto Shooting] is set to [ON], select [End] on
the confirmation screen. (If you select [Pause], press
the shutter button fully to resume recording.)
To Next Page
Loading...
