330
SQW0566
Wi-Fi
Using WEB services
■
Quickly sending pictures in the camera to WEB services
Once you send a picture, you can send pictures to the WEB service as quickly and
easily as using a smartphone, only when the environment for connecting to a wireless
access point is available.
(The instructions below assume that you are already registered to “LUMIX CLUB”
and the camera has a record of a connection to a wireless access point.)
Display the picture
• When pictures are displayed as a group, they are all sent.
When a single picture in a group is displayed, only the picture
being displayed is sent.
Select [Yes] after pressing
(When group pictures are being displayed, select
[Upload(Wi-Fi)] → [Yes])
• The same operation can be performed by touching [ ].
(When group pictures are selected, touch [
], and select
[Upload(Wi-Fi)].)
Select a WEB service you want to connect
Check the send settings, and select [Set]
The camera is connected to the previously used wireless access point and the pictures are sent
to the WEB service.
• Step
, are not necessary when you continue to send another image.
• To change the transmission setting for the picture, press the [DISP.] button. (→321)
• To terminate the connection, press [MENU/SET] or operate other controls to exit the playback
screen. You can also terminate the connection by pressing [Wi-Fi] button on the camera.
(→303)
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step and onwards again.
• You can also change the send settings by pressing [Wi-Fi] button while using a Wi-Fi
connection. (→303)
●
If the camera has no records of connections to wireless access points that are available, a screen
that asks you to select a connection method is displayed. Select the connection method and
connect the camera to a wireless access point. (→338)
●
When you are not registered to “LUMIX CLUB”, a screen that asks you to acquire a new login ID is
displayed. Get a login ID and set a password. (→333)
To Next Page
Loading...
