349
SQW0566
Connecting with other devices
Viewing on TV screen
●
Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect
ratio setting.
●
Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
●
When pictures are displayed, they may not be displayed properly depending on the type of TV.
●
Pictures rotated to portrait may be blurred slightly.
●
You can play back pictures on TVs in other countries (regions) which use the NTSC or PAL
system. You can find [Video Out] setting in [TV Connection] from the [Setup] menu.
●
Depending on the TV to be connected, 4K burst files may not be played back correctly.
●
Check the [HDMI Mode (Play)]. (→83)
●
To play back 24p motion pictures, set [HDMI Mode (Play)] to [AUTO]. Otherwise, the picture is not
output at 24 frames per second.
●
When an HDMI micro cable is connected, pictures are not displayed on the screen.
●
HDMI output will be cancelled if a USB connection cable (supplied) is connected simultaneously.
●
Audio output is stereo.
●
Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD
Memory Card slot
●
Proper playback (aspect ratio) will be dependent on the TV used for viewing.
●
The file format of the motion pictures that can be played back differs depending on the
TV model.
●
You may not be able to play back panorama pictures. Also you cannot perform
automatic scrolling playback of panorama pictures.
●
For cards compatible with playback, refer to the operating instructions of the TV.
To Next Page
Loading...
