VQT2R48 71
Registering commonly used scenes
[MY SCN MODE]/[MY SCENE MODE]
Recording Mode:
and
Both represent the same function. Frequently-used scenes can be preset to each
position so that you can quickly and easily switch to the desired Scene Mode.
For details on the preset scenes, see the pages on Scene Modes.
If recording settings are reset by [RESET] in the [SETUP] menu, the preset Scene
Modes are cleared.
Set to
Set to / ( for )
DMC-TZ10
DMC-ZS7
DMC-TZ8
DMC-ZS5
If you have already
registered in My
Scene Mode, it
is displayed as a
registered scene.
Select and set the scene
(Press [MENU/SET], select , and then
press , if the scene menu is not displayed.)
Scene menu
The zoom lever
can also be used
to switch to the
next screen.
To see a description of a scene:
Select the scene, and press [DISPLAY].
Taking pictures in
registered Scene Modes
Set the mode dial to (
for ), and take a picture.
• Functions, tips for each scene
(62 - 70)
Changing registered Scene
Modes
Perform the registration operation
again
Taking motion pictures
(72)
You can register a commonly used Scene Mode in
( for ) on the mode
dial.
After the settings are made, pictures can be taken in the preset Scene Mode by simply
setting the mode dial to
( for ).
[MENU/SET]
[DISPLAY]
Zoom lever
To Next Page
Loading...
Need help?
General
