VQT2R48 27
For details about the setting procedure in the [SETUP] menu (20)
[HDMI MODE]
Set the output resolution
when connected to a
high-definition TV with
an HDMI mini cable
(optional). (148)
[AUTO]: The output resolution is automatically determined
based on information from the connected TV.
[1080i]: Outputs 1080 effective scanning lines in interlaced
format.
[720p]: Outputs 720 effective scanning lines in
progressive format.
[576p]
1
/[480p]
2
: Outputs 576 (or 480) effective scanning
lines in progressive format.
Interlaced and Progressive Formats
In ‘i’ = interlaced format (interlaced scanning), half of
the effective scanning lines are displayed alternately
every 1/50
1
(1/60
2
) second. In ‘p’ = progressive format
(progressive scanning), high-density video signals are sent
simultaneously for all effective scanning lines every 1/50
1
(1/60
2
) second.
The HDMI socket of this camera supports [1080i] high
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
1
When the video out is
set to [PAL]
2
When the video out is
set to [NTSC]
• Even if [1080i] is set, the motion picture is output at 720p
during playback.
• If no video appears on the TV even though [AUTO] is
set, try switching to [1080i], [720p], or [576p]
1
([480p]
2
)
to adjust to a video format that can be displayed on your
TV. (See the manual for your TV.)
• This is activated when an HDMI mini cable (optional) is
connected.
• For further details (148)
[VIERA Link]
Enable automatic linking
with other VIERA Link-
compatible devices, and
operability with a VIERA
remote control when
connecting via an HDMI
mini cable (optional)
(149).
[OFF]: Operations must be performed via the camera’s
own buttons.
[ON]: Operations may be performed via the remote
control of the VIERA Link-compatible device.
(Not all operations will be available.) Operability of
the camera’s own buttons will be limited.
• Works when connected via an HDMI mini cable
(optional).
Item Settings, notes
The [HDMI MODE], [VIERA Link] menu items are not available in the DMC-TZ8/DMC-ZS5.
To Next Page
Loading...
