26 VQT2R48
Using the [SETUP] menu (Continued)
[RESET]
Reset to the default
settings.
[RESET REC. SETTINGS?]
[YES]/[NO]
[RESET SETUP PARAMETERS?]
[YES]/[NO]
• Information registered in [FACE RECOG.] is reset if
recording settings are reset.
• Resetting the setup parameters will also reset the
following.
Age in years/months and names in [BABY] and [PET]
Scene Modes, any settings in the [TRAVEL MODE]
menu (including GPS function)
, [FAVORITE] in
the [PLAYBACK] menu (set to [OFF]), [ROTATE DISP.]
(set to [ON])
• Folder numbers and Clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[USB MODE]
Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
[SELECT ON CONNECTION]:
Select [PC] or [PictBridge (PTP)] each time you connect to
a computer or PictBridge-compatible printer.
[PictBridge (PTP)]: Select when connecting to a
PictBridge-compatible printer.
[PC]: Select when connecting to a computer.
[VIDEO OUT]
Change the video output
format when connected
to a TV, etc. (Playback
Mode only).
[NTSC]/[PAL]
If the default setting is changed, AVCHD Lite motion
pictures may not be played correctly.
• Operates when AV cable is connected.
[TV ASPECT]
Change the aspect ratio
when connected to a
TV, etc. (Playback Mode
only).
/
• Operates when AV cable is connected.
Item Settings, notes
For details about the setting procedure in the [SETUP] menu (20)
To Next Page
Loading...
Need help?
General
