VQT2R48 37
Taking pictures with your own settings
[PROGRAM AE] Mode
Recording Mode:
To take motion pictures
(72)
To use zoom
(39)
To use flash
(47)
To adjust picture brightness
(53)
To take close-up pictures
(49)
To adjust colouring
(98)
If a warning is displayed about jitter, use
[STABILIZER], a tripod, or [SELFTIMER].
If aperture and shutter speed are shown in red, you do
not have appropriate exposure. You should either use
the flash, change [SENSITIVITY] settings or set [MIN.
SHTR SPEED] to a slower speed.
Aperture value Shutter speed
Jitter alert
display
Using the [REC] menu to change settings and set up your own recording environment.
Turn on the power
Set to
Set to ([PROGRAM AE] Mode)
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
Focus display
(when focus is aligned:
flashing illuminated)
AF area
(aligns focus with subject;
when complete: red green)
Shutter button
Zoom lever
To Next Page
Loading...
Need help?
General
