134 VQT2R48
Using the [PLAYBACK] menu (Continued)
Playback Mode: (Set mode dial to any except )
[PRINT SET]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
Set-up: Press [MENU/SET]
[PLAYBACK] menu Select [PRINT SET]
Select [SINGLE] or [MULTI]
Select picture
[SINGLE]
[MULTI]
Set number of pictures
(repeat steps and when using [MULTI] (up to 999 pictures))
[SINGLE]
[MULTI]
No. to print
Date print
set
No. to print
Date print set
• Date print setting/release Press [DISPLAY] button.
• After confirmation, press
to return to the menu screen.
To clear all
Select [CANCEL] in step
and select [YES].
When using PictBridge-compatible printers, check settings on actual printer as these may take
priority over camera settings.
To print from built-in memory at a shop, first copy pictures to card (137) before making settings.
Cannot be set for files that are not compliant with the DCF standard (44).
Some DPOF information set by other equipment cannot be used. In such cases, delete all of the
DPOF information and then set it again with this camera.
Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These settings will
also be cancelled if a [TEXT STAMP] is applied later.
Motion pictures recorded in [AVCHD Lite] format cannot be set.
To Next Page
Loading...
Need help?
General
