VQT2R48 109
For [MOTION PICTURE] menu setting procedures (20)
Settings:
[AVCHD Lite(GPS REC)] in [REC MODE]
Setting Resolution Bit rate
1
Aspect ratio
[GSH] 1280 x 720 17 Mbps
16:9[GH] 1280 x 720 13 Mbps
[GL] 1280 x 720 9 Mbps
[AVCHD Lite] in [REC MODE]
Setting Resolution Bit rate
1
Aspect ratio
[SH] 1280 x 720 17 Mbps
16:9[H] 1280 x 720 13 Mbps
[L] 1280 x 720 9 Mbps
[MOTION JPEG] in [REC MODE]
Setting Resolution Frame rate
2
Aspect ratio
[HD] 1280 x 720 30 fps
16:9
[WVGA] 848 x 480 30 fps
[VGA] 640 x 480 30 fps
4:3
[QVGA] 320 x 240 30 fps
1
The bit rate is the amount of data per unit time. A higher value translates into a higher image
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available
recording time is shorter when recording a subject with rapid movements.
2
The frame rate is the number of frames per second.
[WVGA] cannot be set in [INTELLIGENT AUTO] Mode.
[QVGA] only can be recorded to the built-in memory.
[CONTINUOUS AF]
Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
Recording Mode:
Settings: [ON] : Adjust focus according to movement of subject during motion picture
recording. (
appears on the screen.)
[OFF] : Fix focus position at the start of motion picture recording.
Use this setting to keep the same focus position for subjects with
little forward/backward movement.
The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.
[WIND CUT]
Reduces recording of wind sounds (wind noise) when recording in a strong wind
Recording Mode:
Settings: [OFF]/[ON] ( appears on the screen.)
When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality
will differ from that of normal recordings.
To Next Page
Loading...
Need help?
General
