154 VQT2R48
Message displays
[THIS MEMORY CARD CANNOT BE USED]
A MultiMediaCard was inserted.
Not compatible with the camera. Use a compatible card.
[THIS MEMORY CARD IS WRITE-PROTECTED]
Unlock the write-protect switch on the card. (16)
[NO VALID PICTURE TO PLAY]
Take pictures, or insert a different card already containing pictures.
[THIS PICTURE IS PROTECTED]
Release the protection before deleting, etc. (135)
[SOME PICTURES CANNOT BE DELETED] [THIS PICTURE CANNOT BE DELETED]
Non-DCF pictures (44) cannot be deleted.
Save needed data on a computer or other device, and then use [FORMAT] on the camera to
erase the card. (28)
[NO ADDITIONAL SELECTIONS CAN BE MADE]
The number of pictures that can be deleted at once has been exceeded.
More than 999 pictures have been set as favourites. (Other than AVCHD Lite motion pictures )
The number of pictures allowing [TITLE EDIT], [TEXT STAMP] or [RESIZE] (multiple settings) at
once has been exceeded.
[CANNOT BE SET ON THIS PICTURE]
[PRINT SET], [TITLE EDIT], or [TEXT STAMP] cannot be made for non-DCF pictures (44).
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN] [SYSTEM ERROR]
The lens is not working correctly.
Turn on power again.
(Consult the dealer or your nearest Service Centre if display still remains)
[SOME PICTURES CANNOT BE COPIED] [COPY COULD NOT BE COMPLETED]
Pictures cannot be copied in following cases.
Picture of same name already exists in built-in memory when copying from card.
File is not of DCF standard.
Picture taken or edited on a different device.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY] [NOT ENOUGH MEMORY ON THE CARD]
There is no space left on the built-in memory or the card. When you copy pictures from the built-in
memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
[BUILT-IN MEMORY ERROR] [FORMAT BUILT-IN MEMORY?]
Displayed when formatting built-in memory via computer, etc.
Reformat directly using camera. Data will be deleted.
[MEMORY CARD ERROR] [FORMAT THIS CARD?]
The card format cannot be used with this camera.
Save needed data on a computer or other device, and then use [FORMAT] on the camera. (28)
[INSERT SD CARD AGAIN] [TRY ANOTHER CARD]
Access to card has failed.
Insert card again.
Try with a different card.
To Next Page
Loading...
