VQT2R48 105
For [REC] menu setting procedures (20)
[PICT.ADJ.]
The elements that determine picture quality are set for each item and the pictures you
record are adjusted to your preferred picture quality.
Recording Mode:
Settings:
Settings content Settings and effect – +
[CONTRAST]
The difference in
brightness and
darkness in pictures
Smaller Greater
[SHARPNESS] Outlines in pictures Soft Sharp
[SATURATION]
Change of colour
saturation
Subdued Vivid
[NOISE REDUCTION] Noise processing Prioritize resolution Reduce noise
If you are concerned about noise when you record a dark scene, it is recommended
to move [NOISE REDUCTION] to the plus side, or to adjust items other than [NOISE
REDUCTION] to the minus side before recording.
[STABILIZER]
Automatically detects and prevents jitter.
Recording Mode:
Settings:
Settings Effect
[OFF] Pictures deliberately taken with no jitter correction
[AUTO]
The optimum image stabilizer is performed automatically based on the
recording conditions.
[MODE 1]
Constant correction
(Monitor image stable, composition easy to determine)
[MODE 2]
Correction when shutter button is pressed
(More effective than [MODE 1])
Setting fixed to [MODE 2] in [SELF PORTRAIT] and [OFF] in [STARRY SKY] Scene
Modes.
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (including Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
This is fixed at [MODE 1] during motion picture recording.
To Next Page
Loading...
