VQT2R48 111
Zoom Mark
Useful for enlarging and saving parts of maps, etc.
To register zoom enlarged size and position
Enlarge with
zoom lever and
select position
with
Press
• To change zoom and
position: Perform steps
and
• To finish Zoom Mark setting:
Restore zoom to original
(1 x) ratio
Zoom Mark
Displayed on registered pictures
To view registered ratio and position:
Display picture
with
Turn to T side
(No need to manually
enlarge or move)
Zoom lever
Immediately displayed at
registered ratio and position
• To cancel
Zoom Mark
[CANCEL
MARK]
(below)
When a picture with a Zoom Mark is deleted, both the original picture and picture with
Zoom Mark will be deleted.
Picture can be deleted even while zoomed in.
[CLIPBOARD] menu
A special menu is used in [CLIPBOARD] Mode.
[REC ON CLIPBOARD] menu (REC/PLAY switch:
Mode dial: )
[PICTURE SIZE]
[2 M]
(Priority to picture quality) / [1 M] (Priority to the number of pictures)
[AUDIO REC.] Record sound (5 seconds) simultaneously. [OFF] / [ON]
[LCD MODE] [OFF] / [AUTO POWER LCD] / [POWER LCD] (23)
[CLOCK SET] (22)
[PLAY ON CLIPBOARD] menu (REC/PLAY switch: Mode dial: )
[CANCEL
MARK]
Select marked clipboard picture with .
Cancel with [MENU/SET].
[COPY]
Copy single pictures from clipboard to card. (Zoom Mark will not be copied.)
Select clipboard picture with and press [MENU/SET].
Select [YES] with and press [MENU/SET].
[LCD MODE] [OFF] / [POWER LCD] (23).
Other items on the [SETUP] menu will reflect settings made in the [PROGRAM AE]
Mode, etc.
To Next Page
Loading...
Need help?
General
