102 VQT2R48
Using the [REC] menu (Continued)
[I.EXPOSURE]
Automatically adjusts contrast and exposure to give more lifelike colours when there is
significant contrast between background and subject.
Recording Mode:
Settings: [OFF]/[LOW]/[STANDARD]/[HIGH]
[LOW], [STANDARD] and [HIGH] indicate the amount of correction.
If the setting is other than [OFF], is displayed on the screen.
When [I.EXPOSURE] works, the colour of changes.
Even if [SENSITIVITY] is set to [80] or [100], when [I.EXPOSURE] is activated, pictures
may be taken at a higher sensitivity than the setting.
Correction effects may not be achieved under certain conditions.
[MIN. SHTR SPEED]
Sets shutter speed to minimum. We recommend using slower shutter speeds to take
brighter pictures in dark locations.
Recording Mode:
Settings: [AUTO] [1/250] [1/125] [1/60] [1/30] [1/15] [1/8] [1/4] [1/2] [1]
Slower shutter speeds allow for brighter pictures but increase risk of jitter, so we
recommend using a tripod and the self-timer.
As still pictures may become dark when using faster values such as [1/250], we
recommend that still pictures are taken in bright locations (
flashes red when shutter
button is half-pressed if still picture will be dark).
displayed on screen for settings other than [AUTO].
To Next Page
Loading...
