VQT2R48 137
For the [PLAYBACK] menu setting procedure (20).
[COPY]
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET]
[PLAYBACK] menu Select [COPY]
Select the copy method (direction)
: Copy all pictures from built-in memory to card
(go to step
).
(Clipboard pictures cannot be copied. Use
[COPY] in the [CLIPBOARD] menu (111).)
: Copy 1 picture at a time from card to built-in
memory.
: Copy 1 picture at a time from card to clipboard
folder (in built-in memory) (not motion pictures).
Select picture with and press [MENU/SET] (for and
)
Select [YES]
• To cancel Press [MENU/SET].
• After confirmation, press
to return to the menu
screen.
• After all the pictures are copied from the built-in
memory to the memory card, the display returns
automatically to the playback screen.
(Screen shown is example)
If there is not enough space on the built-in memory for copying to be performed, turn
off the power, remove the card, and delete pictures from the built-in memory (to delete
clipboard pictures, set the mode dial to Clipboard Mode).
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 15 MB
, approx. 40 MB ) is
recommended.
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
).
Identically-named files will not be copied from card to built-in memory (
).
The print settings and protection settings are not copied. Set them again after copying.
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
Original pictures will not be deleted after copying (to delete pictures (45)).
This setting can only be made when the Playback Mode is in [NORMAL PLAY].
Motion pictures recorded in [AVCHD Lite] format cannot be set.
To Next Page
Loading...
Need help?
General
