88 VQT2R48
Recording the place of recording with GPS
(continued)
Recording Mode:
Record only (Cannot set)
If you do not wish to record place names and landmarks
In step , select [DELETE ALL PLACE-NAMES] and place names and landmarks will
not be recorded.
Or, in step
, if you select [YES] when a message asking whether to delete place
names and landmarks lower than the selected place name, information of the place
name will not be recorded (e.g., city and town names and landmarks if specifying a
prefecture name).
• However, longitude and latitude will be recorded. If you do not wish to record them,
turn [GPS SETTING] to [OFF].
In large public parks or similar locations, landmarks may not be displayed, or
incorrect landmarks may be displayed. If you cannot select the desired landmark in
[GPS AREA SELECT], perform [PLACE-NAME EDIT] after recording. (127)
Changing the display of location name information
The screen display of location name information found by
positioning can be changed.
Location name information
Select [AREA INFO. SET] (20) from the [TRAVEL MODE] menu
Select the item to change the display
Turn items to be displayed [ON] and items not to be displayed
[OFF]
[GPS SETTING] is not available in the DMC-TZ8/DMC-ZS5.
To Next Page
Loading...
Need help?
General
