90 VQT2R48
Useful features for travel [TRAVEL MODE]
Recording Mode:
• If items have been set, the settings for each item are displayed.
The menu name for the selected item is displayed.
[TRAVEL DATE]
If you set your travel schedule and record pictures, which day of your trip the picture was
recorded will be recorded.
Set-up: • Clock must be set in advance (17).
Select [TRAVEL DATE] from the
[TRAVEL MODE] menu (20)
Select [TRAVEL SETUP]
Select [SET]
Set the departure date
Set the return date in the
same way
• The colour of the date frame from
the departure date to the return date
changes.
Close the menu
Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step
.
• If [TRAVEL SETUP] is turned [OFF],
[LOCATION] is also automatically turned
[OFF].
The number of days elapsed is displayed for approx. 5 sec. when switching from
Playback to Recording Mode or when power is turned on. (
displayed at bottom-right
of screen)
The travel date is calculated from the set departure date and the date set in the
camera’s Clock. When destination is set in [WORLD TIME], days elapsed are
calculated based on local destination time.
The set travel date is saved even when the camera’s power is turned off.
When [TRAVEL SETUP] is set to [OFF], the number of days elapsed is not recorded. It
is not displayed even if [TRAVEL SETUP] is set to [SET] after recording.
If settings are made before the departure date, the number of days to departure are
displayed in orange with a minus sign (but not recorded).
To Next Page
Loading...
Need help?
General
