Panasonic PT-REQ12 Series

Chapter 5 Operations — Using the web control function
230 - ENGLISH
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
2
3
4
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit]
Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[Certicate] page
To perform the HTTPS communication or use the control system or application software of Crestron Electronics,
Inc., it is necessary to install the certicate for authentication into the projector.
Click [Detailed set up] → [Certicate].
1
2
3
Choose File
No file chosen
No file chosen
Choose File
1 [CRT Key generate]
Generates the CRT (Certicate) key.
The page to generate the CRT key is displayed by clicking
[Execute].
For details, refer to “Generating the CRT key” (x page 231).
2 [Self-signed Certicate]
[Generate]:
Generates the self-signed certicate by the projector.
The page to generate the self-signed certicate is displayed by
clicking [Execute].
For details, refer to “Generating the self-signed certicate”
(x page 235).
[Information]:
Displays the status of the self-signed certicate.
f [Not generated]: Self-signed certicate is not generated.
f [(host name)]: Self-signed certicate is generated and valid.
The host name registered in the self-signed certicate is
displayed.
f [Invalid (Reason: Server Certicate installed)]: The server
certicate is valid, so the generated self-signed certicate is
invalid.
Information of the generated self-signed certicate is displayed
by clicking [Conrm].
The generated self-signed certicate can be deleted by clicking
[Delete].
For details, refer to “Conrming the information of the self-
signed certicate” (x page 235).
3 [Server Certicate]
[Generate Certicate Signing Request]:
Generates signing request (Certicate Signing Request).
The page to generate the signing request is displayed by
clicking [Execute].
For details, refer to “Generating the signing request”
(x page 233).
[Server Certicate install] / [Intermediate Certicate install]:
Installs the server certicate and the intermediate certicate.
The certicate is installed into the projector by specifying the
certicate le and clicking [Execute].
For details, refer to “Installing the certicate” (x page 234).
[Information]:
Displays the status of the server certicate.
f [Invalid]: The server certicate is not installed. Or, the
current CRT key is di󰀨erent from the CRT key used for
requesting the installed server certicate.
f [(host name)]: The server certicate is installed and valid.
The host name registered in the server certicate is
displayed.
f [Expired]: Valid period of the server certicate has expired.
The host name registered in the server certicate is displayed
when the server certicate is installed and valid.
Information of the installed server certicate is displayed by
clicking [Conrm].
The installed server certicate and the intermediate certicate
can be deleted by clicking [Delete].
For details, refer to “Conrming the information of the server
certicate” (x page 234).