Panasonic PT-REQ12 Series

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 203
14) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
15) Press as to select [PASSWORD CONFIRM] in [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
16) Enter the password entered in Step 13).
17) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
18) Press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
19) Press qw to select [OK], and press the <ENTER> button.
Note
f For limitation of the character string that can be set as a password, refer to “[PASSWORD POLICY]” (x page 73).
f The user name and password of the administrator account can also be changed in “[Set up password] page (when accessed by
administrator account)” (x page 243) of the web control screen.
f The user name and password of the standard user account without administrator rights can be set in “[Set up password] page (when
accessed by administrator account)” (x page 243) of the web control screen.
[NETWORK SECURITY]
Perform the setting to protect the projector from an external attack or abuse via LAN.
[COMMAND PROTECT]
Perform the setting regarding connection authentication when using the command control function.
1) Press as to select [NETWORK SECURITY].
2) Press the <ENTER> button.
f The [NETWORK SECURITY] screen is displayed.
3) Press qw to switch the [COMMAND PROTECT] setting.
[ENABLE]
Connects to the projector in protect mode.
Connection authentication is performed using the user name and password of the administrator
account.
[DISABLE]
Connects to the projector in non-protect mode.
Connection authentication is not performed.
f The conrmation screen is displayed when the setting is switched.
4) Press qw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
5) Press asqw to select [USER NAME], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
6) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the user name of the administrator account.
7) After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
8) Press as to select [PASSWORD], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
9) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the password of the administrator account.
10) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
11) Press asqw to select [OK], and press the <ENTER> button.