Chapter 4 Settings — [NETWORK] menu
202 - ENGLISH
8) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9) Press as to select [PASSWORD CONFIRM], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
10) Enter the password entered in Step 7).
11) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
13) Press qw to select [OK], and press the <ENTER> button.
Note
f For limitation of the character string that can be set as a password, refer to “[PASSWORD POLICY]” (x page 73).
f When a password is not set for the administrator account (when blank), the network function of the projector cannot be used. When using
the web control function or the communication control via LAN (including operation by application software), set a password.
f The user name and password of the standard user account without administrator rights can be set in “[Set up password] page (when
accessed by administrator account)” (x page 243) of the web control screen.
Changing the setting of the administrator account
Change the user name and password of the account with administrator rights.
1) Press as to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
3) Press as to select [USER NAME] in [CURRENT], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
4) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the current user name.
5) After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
6) Press as to select [PASSWORD] in [CURRENT], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
7) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the current password.
8) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9) Press as to select [USER NAME] in [NEW], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
10) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the new user name.
f When not changing the user name, enter the current user name.
11) After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [PASSWORD] in [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
13) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the new password.
f Up to 16 characters can be entered.
f When not changing the password, enter the current password.
To Next Page
Loading...
