Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 185
Note
f To return the setting in the [PROJECTOR SETUP] menu → [LIGHT OUTPUT] to the factory default setting, initialize it by selecting [OTHER
USER SETTING].
f To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→ [DATE AND TIME] → [TIME ZONE] to the factory default settings, initialize them by one of the following methods.
g Initializing by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g Initializing by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
[FIRMWARE UPDATE]
Rewriting of the rmware is possible by using a USB memory.
For details of operation, refer to “Updating the rmware using the USB memory” (x page 257).
[SAVE LOG]
This function is used by a service person.
[SERVICE PASSWORD]
This function is used by a service person.
To Next Page
Loading...
