Panasonic PT-REQ12 Series

Chapter 5 Operations — Using the web control function
ENGLISH - 243
[Network security] page
Perform the setting to protect the projector from an external attack or abuse via LAN.
Click [Detailed set up] → [Network security].
1
2
1 [COMMAND PROTECT]
Performs the setting regarding connection authentication when
using the command control function.
[DISABLE]:
Connects to the projector in non-protect mode.
Connection authentication is not performed.
[ENABLE]:
Connects to the projector in protect mode.
Connection authentication is performed using the user name
and password of the administrator account.
2 [Submit]
Updates the setting.
The conrmation screen is displayed when [Submit] is clicked
with [DISABLE] selected for [COMMAND PROTECT]. Update
of the setting is performed by clicking [OK] in the conrmation
screen.
Note
f When [COMMAND PROTECT] is set to [DISABLE], the projector becomes vulnerable against a threat on the network because connection
authentication will not be performed. Use this function by understanding the risk.
f For details on how to use the command control function, refer to “Control commands via LAN” (x page 273).
[Set up password]
[Set up password] page (when accessed by administrator account)
Click [Set up password].
1
2
4
3
1 [Administrator]
Select this item when changing the setting of the administrator
account.
2 [User]
Select this item when changing the setting of the standard user
account.
3 [PJLink]
Select this item when changing the setting of the PJLink
account.
4 [Next]
Displays the screen to change the setting of the password.