Panasonic PT-REQ12 Series

Chapter 5 Operations — Using the web control function
244 - ENGLISH
[Administrator]
Set the user name and password of the administrator account.
1
3
2
4
1 [Account]
Displays the account to change.
2 [Current]
[User name]:
Enter the current user name.
[Password]:
Enter the current password.
3 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
4 [Change]
Determines the change of password.
Note
f To change the setting of the administrator account, entry of [User name] and [Password] in [Current] is required.
f When the projector is already registered in application software (such as “Multi Monitoring & Control Software” and “Smart Projector
Control”) which uses the communication control via LAN, communication with the projector will become impossible if a user name or
password for [Administrator] is changed. If a user name or password for [Administrator] is changed, update the registration information of
the application software in use.
[User]
1
2
3
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
3 [Change]
Determines the change of password.