Chapter 1 Preparation — Precautions for use
ENGLISH - 31
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the
number of accessories.
Wireless/wired remote control unit <1>
(N2QAYA000252)
Power cord
(K2CM3YY00057)
200 V - 240 V
(K2CT3YY00101)
200 V - 240 V
(K2CG3YY00218)
100 V - 120 V
For Korea
(K2CZ3YY00032) <1>
200 V - 240 V
For India
(K2CZ3YY00100) <1>
200 V - 240 V
For Taiwan
(K2CH3YY00009) <1>
200 V - 240 V
AAA/R03 or AAA/LR03 battery <2>
(For remote control unit)
SLOT adapter <1>
(DPVF2722YA/X1)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For lost accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from young children.
Note
f The SLOT adapter is used when the Intel
®
SDM Small (Intel
®
SDM-S) specication Function Board is installed in the slot on
the projector. (x page 53)
f The type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
f The part numbers of accessories are subject to change without prior notice.
To Next Page
Loading...
