Panasonic PT-REQ12 Series

Chapter 5 Operations — Updating the rmware
252 - ENGLISH
Updating the rmware
The rmware of the projector can be updated via LAN or using a USB memory.
Firmware that can be uploaded can be downloaded from the following website (“Panasonic Professional Display
and Projector Technical Support Website”). Customer can update the rmware if a newer version than the current
rmware version is published.
https://panasonic.net/cns/projector/pass/
It is necessary to register and log in to PASS
*1
to conrm the availability of the rmware that can be updated or to
download the rmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
r How to conrm the rmware version
Current rmware version can be conrmed by pressing the <STATUS> button on the remote control and
displaying the [STATUS] screen.
The rmware version can also be conrmed in the [PROJECTOR SETUP] menu → [STATUS].
10000h
10000h / 10000h
1/6
1.00
1h 23m
123456789012
27°C/80°F
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
MENU
EXITCHANGE
ENTER
E-MAIL/USB
SELF TEST
NO ERRORS
EXHAUST AIR TEMP.
OPTICS MODULE TEMP.
INTAKE AIR TEMP.
FIRMWARE VERSION
CONTINUOUS LIGHTING TIME
LIGHT RUNTIME
PROJECTOR RUNTIME
LIGHT1 TEMP.
LIGHT2 TEMP.
PROJECTOR TYPE
STATUS
PT-REQ12
SERIAL NUMBER
Note
f A LAN cable is required to connect to the network via wired LAN.
Updating the rmware via LAN
Example of network connection
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect the LAN cable to the <LAN> terminal equipped on the projector as standard or the <DIGITAL LINK IN/LAN> terminal of the optional
DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) installed in the slot.
f Update cannot be performed using the “IPv6” protocol. Set the [NETWORK] menu → [WIRED LAN] → [IP VERSION] to either [IPv4] or
[IPv4 & IPv6] and assign the IP address for “IPv4”.
Computer
Projector
Switching hub
LAN cable (straight) LAN cable (straight)