42
10.18. Disassembly of Transformer
P. C .B .
• Follow the (Step 1) - (Step 9) of item 10.3.
• Follow the (Step 1) - (Step 6) of item 10.7.
Step 1 : Detach 4P cable at connector (CN5101) on Power
P. C .B . .
Step 2 : Detach 7P cable at connector (CN5903) on Trans-
former P.C.B..
Step 3 : Remove 1 screw.
Step 4 : Place a support block to tilt the unit as shown.
Step 5 : Remove 4 screws.
Step 6 : Remove Transformer P.C.B..
Caution : Keep Transformer cover P.C.B. in safe place for
assembling use.
To Next Page
Loading...
