Pantech Flex - Setup Wizard; About Phone

100
SETTINGS
Setup Wizard
Specify basic information, such as language, network
connection, location service, and account when you turn on
the phone for the first time.
1. Tap
> Settings > Setup wizard.
2. Select and tap a language, and then tap START.
3. Tap Connect to Wi-Fi network, and then select and tap an
available Wi-Fi network.
x Tap Skip, and go to step 5 to connect to the network
later.
4. Follow the necessary steps, and then tap Next.
5. Tap Add a Google Account to set up a Google account, and
then follow the necessary steps.
x Tap Skip to skip this step.
6. Tap OFF next to See location in applications (such as
Maps) using wireless networks to use Google location.
7. Tap Finish.
8. Read the notice for recycling your device, and then tap OK.
AT&T Software Update
Check and update your software without visiting the dealer.
1. Tap
> Settings > AT&T software update.
2. Select an option.
Option Description
Check for
updates
Check for software updates.
Continue
update
Resume a postponed software update.
Note After downloading the software, the device will ask you to
update the software now. If you choose to update the software now,
the phone will restart. If you postpone updating the software, you can
select to be reminding in 1 hour, 4 hours, or 8 hours in Options. After
selecting an option, you will be sent back to standby mode.
To resume an update, tap Continue update.
About Phone
View general information of your phone.
1. Tap
> Settings > About phone.
2. Select an option.
Option Description
Status
View the battery status, battery level,
network, signal strength, mobile network
type, service state, roaming, mobile network
state, your phone number, IMEI, IMEI SV,
IP address, Wi-Fi Mac address, Bluetooth
address, serial number, and Up time.
Legal
information
View the Open source licenses and Google
legal information.
Model
number
View the model number.
Android
version
View the Android OS version.
Baseband
version
View the baseband version.
Kernel
version
View the kernel version.
Build number View the build number.