Installing the Drive 3-19
650V AC Drive
72mm
26mm
54mm
7mm
mm
15.5
±
1
0
3.5
±
0.5
0
mm
32
±
2
0
mm
mm 5.5
±
0.5
mm
25
±
0.5
mm
58
±
0.5
Template
Cut-out
Fitting the Remote 6511 Keypad
Two types of 650 keypad are available:
SSD Part No. 6511/DISP/... not suitable for remote-mounting
SSD Part No. 6511/DISPR/... suitable for remote-mounting on drives with an RS232 port
You can remote-mount the keypad using:
• a Remote Keypad (identified by the RS232
connector on the back
• the RS232 (P3) port located under the
terminal cover
A standard P3 lead, Parker SSD Part Number
CM057375U300, is used to connect the keypad
to the drive.
Two self-tapping screws are provided with the
keypad. Remove the protective film from the
gasket. An enclosure rating of IP54 is achieved
for the remote keypad when correctly mounted.
Assembly Procedure
Cut-out Dimensions
The drawing below can be photocopied actual size (100%) and used as a template.
To Next Page
Loading...
