Parker 650V series - Chapter 9 Technical Specifications; Understanding the Product Code

Technical Specifications 9-3
650V AC Drive
Catalog Number (North America)
The unit is identified using a 6 block alphanumeric code which records how the Inverter was
calibrated, and its various settings when dispatched from the factory.
The Product Code appears as the “Cat No.”. Each block of the Product Code is identified as
below:
Typical example:
650V/0020/460/1BN
This is a 20Hp 460V, rated at 460 Volts supply, NEMA 1, Braking option fitted, no internal RFI
filter.
Frame C, D, E, F – Catalog Number (North America)
Block
No.
Variable Description
1 650V Generic product
2 XXXX Four numbers specifying the power output in Hp:
Frame C
0010 = 10Hp
0015 = 15Hp
0020C = 20Hp
Frame D
0015 = 15Hp
0020 = 20Hp
0025 = 25Hp
0030 = 30Hp
0040D = 40Hp
Frame E
0030 = 30Hp
0040 = 40Hp
0050 = 50Hp
0060 = 60Hp
Frame F
0040 = 40Hp
0050 = 50Hp
0060 = 60Hp
0075 = 75Hp
0100 = 100Hp
0125 = 125Hp
0150 = 150Hp
3 XXX Three numbers specifying the nominal input voltage rating:
230 220 to 240V (±10%) 50/60Hz
460 380 to 460V (±10%) 50/60Hz
4 X Enclosure option:
1 - Nema 1 (IP20 and falling dirt protection (UL Type 1)
and remote keypad with Comms)
C - Open Chassis style (IP20 only) and remote keypad with
Comms
5 X Characters specifying the braking option:
N Brake power switch not fitted (Frames D & E only)
B Brake power switch fitted - no braking resistors supplied
Note: External braking resistors should be specified and ordered separately.
6 X Characters specifying the fitting of the internal RFI filter:
N No internal RFI filter installed
B Internal RFI filter installed