9-2 Technical Specifications
650V AC Drive
Legacy Product Code
Frame C, D, E, F – Model Number (Europe)
1 650VC
Characters specifying the generic product:
650VF
Frame C
Frame D
Frame E
Frame F
2 XXXX Four numbers specifying the power output:
Frame C
0055 = 5.5kW
0075 = 7.5kW
0110 = 11kW
0150 = 15kW
Frame D
0110 = 11kW
0150 = 15kW
0180 = 18.5kW
0220 = 22kW
0300 = 30kW
Frame E
0220 = 22kW
0300 = 30kW
0370 = 37kW
0450 = 45kW
Frame F
0300 = 30kW
0370 = 37kW
0450 = 45kW
0550 = 55kW
0750 = 75kW
0900 = 90kW
0910 = 90kW
(150HP)
3 XXX Three numbers specifying the nominal input voltage rating:
230 220 to 240V (±10%) 50/60Hz
400 380 to 460V (±10%) 50/60Hz
4 XXXX Four digits specifying the mechanical package including livery and
mechanical package style:
First two digits Livery
00 Standard Parker SSD Drives livery
05 Distributor livery
(01-04, 06-99 - Defined customer liveries )
Third digit Mechanical packaging style
1 Standard (IP20), protected panel mounting with gland
plate
2 IP20 and falling dirt protection (UL Type 1)
(not available on Frame F)
3 Enclosed (IP20), with through-panel mounting kit
(not available on Frame F)
Fourth digit Keypad
0 No Keypad
1 6521 Keypad option fitted
5 XX Two characters specifying the user interface language including operating
frequency.
UK English (50Hz)
US English (60Hz)
6 X Reserved
0 Standard product
7 X Characters specifying the Comms Interface option:
0 Not fitted
RS485 Integral RS485 port on the control board
8 X Characters specifying the braking option:
0 Brake power switch not fitted (Frames D, E & F only)
B0 Brake power switch fitted - no braking resistors supplied
Note: External braking resistors should be specified and ordered separately.
9 X Characters specifying the auxiliary mains power supply.
0 No auxiliary supply required (Frame C – E)
115 110 to 120V (±10%), 50/60Hz (Frame F)
230 220 to 240V (±10%), 50/60Hz (Frame F)
10 X Digits specifying engineering special options:
0 Standard product
To Next Page
Loading...
