Parker 650V series - Page 38

Installing the Drive 3-21
650V AC Drive
Top Cover
This can be fitted to wall-mounted 650V units to give improved compliance ratings. Refer to
Chapter 9: “Technical Specifications” - Environmental Details.
The top cover must be correctly fitted and secured with screw(s).
Note: The maximum operating temperature of the drive is reduced by fitting the top cover.
Refer to Chapter 9: “Technical Specifications” - Environmental Details.
Item
Part Number
Top Cover Kit (UL Type 1 / IP4x), including screws
A protective cover fitted to wall-mounted units to give improved
compliance ratings
• Frame C
• Frame D
•
Frame E
LA465034U002
LA465048U002
LA465058U002
External Brake Resistor
These standard power resistors are
available from Parker SSD Drives.
These resistors should be mounted
on a heatsink (back panel) and
covered to prevent injury from
burning.
Part Number
CZ463068 CZ388396
Models used on
Frames C, D, E Frames C, D, E
Resistance
56Ω 36Ω
Maximum Wattage
200W 500W
5 second rating
500% 500%
3 second rating
833% 833%
1 second rating
2500% 2500%
Dimensions L1 (mm)
165 335
L2 (mm)
146 316
L3 (mm)
125 295
W (mm)
30 30
H (mm)
60 60
D (mm)
5.3 5.3
a (mm)
13 13
b (mm)
17 17
Flying lead length (mm)
500 500
Electrical Connection
M5 spade M5 ring
L1
H
flying leads
L2
L3
W
a
b
a
b
D