To Next PageTo Next PageWhat to do if my Particle Measuring Systems Cash Counter shows 'No Data!' error?
If your Particle Measuring Systems Cash Counter displays a 'No Data!' error, ensure that the time period settings, specifically from 'Start Time' to 'Stop Time', are sufficiently wide to encompass the time when the samples of interest were taken. After adjusting the time range, remember to click 'Data List' to refresh the displayed data records.
How to fix 'RS232c communications error!' on Particle Measuring Systems Cash Counter?
To resolve the 'RS232c communications error!' on your Particle Measuring Systems Cash Counter, verify that the cable is properly connected. Also, confirm that the handheld unit is set to UPLINK and that the PC Link software is connected to the same address number as the ID number in the unit.
General| Brand | Particle Measuring Systems |
|---|---|
| Model | HandiLaz Mini |
| Category | Cash Counter |
| Language | English |
Details the operational purpose of each key on the HandiLaz Mini device.
Lists the technical parameters, physical dimensions, and performance characteristics of the unit.
Explains methods for starting sample collection via key presses and HOTKEY.
Outlines the sampling sequence and how to adjust sample settings.
Describes information presented on the screen after a sampling session.
Guides on setting up and performing multiple samples from a single location.
Instructions for configuring and executing a single sample measurement.
Details on how to conduct continuous air particle sampling.
Explains how to take samples and perform statistical calculations.
Procedures for sampling and calculating results according to ISO standards.
Guides users on how to access and review data stored on the HandiLaz Mini.
Details the process of setting up and using the UPLINK function for PC transfer.
Instructions for printing selected or all data records via an external printer.
Steps to erase all stored sample data from the device's memory.
Configures thresholds for particle concentration alarms and their visual indicators.
Selects display and storage units for particle counts (e.g., Counts, Counts/m³).
Manages device settings like Date, Time, Instrument ID, and Communication Protocol.
Enables quick sampling initiation via a single key press.
Configures initial delay and automatic sampling start after the delay.
Guide to installing the software required for PC data transfer.
Lists necessary PC specifications and communication setup details.
Addresses common issues and solutions for data download problems.
Identifies where error codes and alarm indicators are displayed on the unit.
Defines the meaning of various error codes and symbols for troubleshooting.
Outlines the hierarchy of error messages based on criticality.
Explains the visual cues and behavior related to low battery power.
Lists the necessary PC hardware and OS for software installation.
Step-by-step guide for installing the HandiLaz Mini data retrieval software.
Instructions for connecting the device and utilizing the software interface.
Details on how to upload, select, and view data records from the device.
Guides on saving data to CSV, printing records, and viewing detailed information.
Instructions for synchronizing the HandiLaz Mini's system time using the software.
Critical warnings about Class I laser product usage, provided in multiple languages.
Explains the significance of hazard symbols displayed on the equipment.
