Page 6-2 HandiLaz Mini Operator’s Manual
Chapter 6: Downloading Data to PC
6
Review the data of interest as displayed on the screen.
Notes
• To see additional data on a record, highlight the record, then review the
“Details” box. For example, the “Data list’ information will only tell you if
there was an error, but the “Details” box will have information on exactly
which type of error occurred (e.g., Laser Error or Flow Error).
• Select “Print All Records” to print using the PC or network printer.
• Select “Save All Records” to download data onto a CSV file saved on the PC.
• To read the time setting in the particle counter, or to reset the time in the
particle counter, select the “Time Setup with HandiLaz” tab.
PC Requirements
*If USB is used, a USB-RS232c converter required.
Communications Requirements
CPU Compatible IBM PC with greater than Pentium capacity.
Memory >128 MB
Hard Disk Space >50 MB when installed
Operating System Microsoft: Windows 2000 Professional, XP Home
Edition, XP Professional
Display >800 × 600 resolution, with 32 true colors
Interface 9-pin COM port or USB 1.1 interface*
COM Port COM1---COM8
Baud Rate 600
Data Bit On
Stop Bit 1(fixed)
To Next Page
Loading...