Standardized Device specific errors
Error
Number
Error Description description/explanation/examples
–300
Device specific error This code indicates only that a Device-Dependent
Error as defined in IEEE-488.2, 11.5.1.1.6 has oc
-
curred. Contact your local service center.
–311
Memory error Indicates that an error was detected in the counter’s
memory. Contact your local service center.
–312
PUD memory lost Indicates that the protected user data saved by the
*PUD command has been lost. Contact your local
service center.
–314
Save/recall memory
lost
Indicates that the nonvolatile calibration data used
by the *SAV? command has been lost. Contact your
local service center.
–330
Self-test failed Contact your local service center.
–350
Queue overflow A specific code entered into the queue in lieu of the
code that caused the error. This code indicates that
there is no room in the queue and an error occurred
but was not recorded.
Error Messages
Error Code -300 to -350 7-11
To Next Page
Loading...
Need help?
General
