EasyManuals Logo

Pendulum CNT-90 Series Programmer's Handbook

Pendulum CNT-90 Series
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #238 background imageLoading...
Page #238 background image
8-130 Command Reference
*EMC
8<Decimal data>
Enable Macros
This command enables and disables expansion and execution of macros. If mac
-
ros are disabled, the instrument will not recognize a macro although it is defined in
the instrument. (The Enable Macro command takes a long time to execute.)
Parameters:
<Decimal data> = is 0 or 1. A value which rounds to 0 turns off macro execution. Any other
value turns macro execution on.
+
Note that 1 or 0 is <Decimal data>, not <Boolean>!
ON|OFF is not allowed here!
Returned format: «1|0» ¿
1 indicates that macro expansion is enabled.
0 indicates that macro expansion is disabled.
Example:
SEND®
*EMC 8 1
Enables macro expansion and execution.
Complies with standards: IEEE 488.2 1987.

Table of Contents

Other manuals for Pendulum CNT-90 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pendulum CNT-90 Series and is the answer not in the manual?

Pendulum CNT-90 Series Specifications

General IconGeneral
BrandPendulum
ModelCNT-90 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals