Pendulum CNT-90 Series Programmer's Handbook

8-27 Command Reference
Configure Function
Set up Instrument for Measurement
:CONFigure
[:SCALar]<Measuring Function>
8
<Parameters>,(<Channels>)]
:ARRay<Measuring Function>
8
(<Array Size>)[,<Parameters>,(<Channels>)]
+
The array size for :MEASure and :CONFigure, and the channels, are expression
data that must be in parentheses ( ).
Measuring Function, Parameters and Channels are explained on page 8-54.
The counter uses the default Parameters and Channels when you omit them in
the command.

Pendulum CNT-90 Series Specifications

General

Brand	Pendulum
Model	CNT-90 Series
Category	Measuring Instruments
Language	English