Pendulum CNT-90 Series Programmer's Handbook

8-54 Command Reference
(@1) means input A
(@2) means input B
(@3) means input C (RF input option)
(@4) means the rear panel arming input
(@6) means the internal reference
* CNT 91 only
** CNT-90XL only
*** CNT-91 only, in combination with :CONFigure, not
:MEASure
:MEASure|:CONFigure
[:SCALar]
[:VOLTage]
:FREQuency
[:CW]? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3|@4|@6)]]
:BTBack? * [
_
[<exp. value>[,<resol.>],][(@1|@2)]]
:BURSt? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3)]]
:POWer[:AC]? ** [
_
(@3)]
:PRF? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3)]]
:RATio? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3),(@1|@2|@3)]]
:NCYCles? [
_
(@1|@2|@3)]
:PDUTycycle|:DCYCle?[
_
[<reference>,][(@1|@2)]]
:NDUTycycle? [
_
[<reference>,][(@1|@2)]]
:MAXimum? [
_
(@1|@2)]
:MINimum? [
_
(@1|@2)]
:PTPeak? [
_
(@1|@2)]
:RATio? [
_
(@1|@2),(@1|@2)]
:PSLEwrate? [
_
(@1|@2)]
:NSLEwrate? [
_
(@1|@2)]
:PERiod? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3)]]
:BTBack? * [
_
[<exp. value>[,<resol.>],][(@1|@2)]]
:PERiod:AVERage? [
_
[<exp. value>[,<resol.>],][(@1|@2|@3)]]
:PHASe? [
_
[<exp. value>[,<resol.>],][(@1|@2),(@1|@2)]]
«:RISE:TIME|:RTIM»? [
_
[<lo thresh.>[,<hi thresh.>[,<exp. value>[,<resol.>]]],][(@1|@2)]]
«:FALL:TIME|:FTIM»? [
_
[<lo thresh.>[,<hi thresh.>[,<exp. value>[,<resol.>]]],][(@1|@2)]]
:TINTerval? [
_
[<exp. value>[,<resol.>],][(@1|@2),(@1|@2)]]
:PWIDth? [
_
[<reference>,][(@1|@2)]]
:NWIDth? [
_
[<reference>,][(@1|@2)]]
:TOTalize?
_
:[CONTinuous] *** [
_
[(@1|@2)][,(@1)|@2)]]

Pendulum CNT-90 Series Specifications

General

Brand	Pendulum
Model	CNT-90 Series
Category	Measuring Instruments
Language	English