Command Reference 8-23
:CALCulate :TOTalize :TYPECNT-91
8 APLUSB|AMINUSB|ADIVB
Select Postprocessing for Totalize
If both counting registers (primary and secondary channel) are being used, you can
manipulate the measurement results before presentation by selecting one of three
postprocessing formulas that operate directly on the raw data.
Parameters
APLUSB selects the expression A+Bto add the results in the two registers.
AMINUSB selects the expression A-Bto subtract the value in register B from the
value in register A.
ADIVB selects the expression A/Bto calculate the ratio of the contents in regis
-
ters A and B.
Example
SEND® :CALC:TOT:TYPE ADIVB
Selects the formula A / B.
Returned format: APLUSB|AMINUSB|ADIVB¿
*
RST condition:
To Next Page
Loading...
Need help?
General
