Pendulum CNT-90 Series Programmer's Handbook

Command Reference 8-75
:MEASure: ARRay: TIError?CNT-91
8 (array size)[,[<exp value>[,<resol>],][(@1|(@2)]]
Time Interval Error (TIE)
This command automatically performs TIE measurements on clock signals from a
predefined collection of system frequencies. See list on page 8-100.
TIE is defined as positive and increasing if the measured frequency exceeds the
reference frequency.

Pendulum CNT-90 Series Specifications

General

Brand	Pendulum
Model	CNT-90 Series
Category	Measuring Instruments
Language	English