Unpacking
Check that the shipment is complete and that
no damage has occurred during
transportation. If the contents are
incomplete or damaged, file a claim with the
carrier immediately. Also notify your local
Pendulum sales or service organization in
case repair or replacement may be required.
Check List
The shipment should contain the following:
— Counter/Timer/Analyzer CNT-90/91 or
Frequency Calibrator/Analyzer CNT-91R
or CNT-91R/71B or Microwave Coun-
ter/Analyzer CNT-90XL
documentation in PDF:
Service Manual (CNT-91R/71B
only)
The type plate on the rear panel shows type
number and serial number. See illustrations
on page 2-5 and 2-6. Installed options are
listed under the menu User Options - About,
where you can also find information on
firmware version and calibration date. See
page 2-15.
The CNT-91R/71B version is identified by a
unique identification marking, or UID. This
permanent tag contains a barcode and allows
customers to track easily their inventory and
property.
USER MANUAL ● CNT 9x Series ● Rev.22 February 2020
— Line cord
— Printed version of the Getting Started
Manual
— Brochure with Important Information
— Certificate of Calibration
— Options you ordered should be installed.
See Identification below.
— CD including
the
following
To Next Page
Loading...
Need help?
General
