96
3
Taking Pictures
5
Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat Steps 4 and 5 to take the second
image.
The stitched first and second image appears on the display (Instant
Review), and then is saved.
1
When the shooting screen for the second image is
displayed in Step 5 on p.96, press the 4 button.
A confirmation dialog appears.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Detection function is activated (p.70), it works only
when taking the first image.
• The stitched together images are saved with the pixel size of f
(2592×1944).
To Cancel after Taking the First Shot
2
OK
Exit
To Next Page
Loading...
