Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection, and will be
used when none of the other higher priority connections are available.
This option allows you to choose whether to remain connected or disconnected when this WAN
connection is no longer in the highest priority and has entered the standby state. When Remain
connected is chosen, bringing up this WAN connection to active makes it immediately available
for use.
When Internet traffic is not detected within the user-specified timeframe, the modem will
automatically disconnect. Once the traffic is resumed by the LAN host, the connection will be
re-activated.
This setting allows you to specify the health check method for the cellular connection. Available
options are Disabled, Ping, DNS Lookup, HTTP, and SmartCheck. The default method is
DNS Lookup. See Section 10.4 for configuration details.
If a health check test cannot be completed within the specified amount of time, the test will be
treated as failed.
This is the time interval between each health check test.
This is the number of consecutive check failures before treating a connection as down.
This is the number of responses required after a health check failure before treating a
connection as up again.
To Next Page
Loading...
Need help?
General
