Installation and commissioning
25
8.04 Basic position of the machine drive unit
Activate service level "c", see Chapter 12.12.01 Selecting the user level.●
Call up parameter "700" by pressing the +/- keys (P) or (S).●
Use the pedal function to sew one stitch.
Turn the balance wheel in the sewing direction until the lower edge of the descending
needle eye is level with the upper edge of the needle plate.
Conclude the adjustment of the sewing motor by pressing the "TE" key.
●
●
●
700c 0
798c *1
To Next Page
Loading...
