Sewing
42
10.03.03 Switch on edge trimmer with delay (waistband extension)
Switch on the machine.
Activate mechanic level "b", see Chapter 12.12.01 Selecting the user level.
●
●
Activate the top line of the display (LED in the key is illuminated).
By pressing "+" the +/- key (P) call up the function
- "PC" (piece counter),
- "EDGE CUT" (edge trimmer),
- "SL" (stitch length)
- "BTM OFF (thread monitor) or
- "Software version"
●
●
SL 2.2mm
3 3 3 3 10 0 5
Press the +/- key (D) to alter the number of stitches for the waistband extension.
After the appropriate function has been selected, the stitch counter can be re-
set by pressing the "F3" key.
The thread monitoring method or the number of stitches can be selected with
parameter "660", respectively "760", see Chapter 12.12.03 List of parameters
or enter directly after selecting the appropriate function.
●
EDGE CUT 10mm
To Next Page
Loading...
Need help?
General
