Adjustment
88
12.12.02 Example of parameter input
Switch on the machine.
Press the TE key to call up the parameter input function.
The selection of the editable parameter depends on the active user level, see Chapter
12.12.01 Selecting the user level and Chapter 12.12.03 List of parameters.
●
●
Press the +/- keys (P) to select the desired parameter, e.g. parameter "660" (bobbin
thread monitoring).
●
Press the +/- keys (L) to set the desired value for the parameter, e.g. value "2" (bobbin
thread monitoring by stitch counting).
●
The value for the number of stitches for the bobbin thread monitoring can be
entered with parameter "760".
Press the TE key to take over the values of the altered parameter and to call up the sew-
ing mode.
●
116a 0
660a 0
660a 2
To Next Page
Loading...
Need help?
General
